Online/activity
LED (green)
Fault/UID LED
Interpretation
(amber/blue)
Flashing regularly
)
Do not remove the drive. Removing a drive may terminate the
current operation and cause data loss.
array that is undergoing capacity
expansion or stripe migration, but a predictive failure alert has
been received for this drive. To minimize the risk of data loss, do
not replace the drive until the expansion or migration is
complete.
(1 Hz)
Amber, flashing
regularly (1 Hz
The drive is part of an
Flashing regularly
(1 Hz)
Off Do not remove the drive. Removing a drive
current operation and cause data loss.
The drive is rebuilding, erasing, or it is pa
undergoing capacity expansion or stripe mi
may terminate the
rt of an array that is
gration.
Flashing irregularly Amber, flashing
regularly (1 Hz)
The drive is active, but a predictive failure ale
received for this drive. Replace the driv
rt has been
e as soon as possible.
Flashing irregularly Off The drive is active, and it is operating normally.
Off Steadily amber A critical fault condition has been identified
the controller has placed it offlin
possible.
for this drive, and
e. Replace the drive as soon as
Off Amber, flashing
regularly (1 Hz)
A predictive failure alert has b
Replace the drive as soon as possible.
een received for this drive.
Off Off The drive is offline, a spare, or not co
array.
nfigured as part of an
PCI r c e L
iser ag EDs
CAUTION: T boards, power down the server and
remove all A PCI riser cage.
o prevent damage to the server or expansion
C power cords before removing or installing the
Component identification 76
To Next Page
Loading...
