HP ProLiant DL585 Generation 2 - Expansion and System Board Procedures

Removal and replacement procedures 48
4.
Open the latch, and remove the expansion slot cover.
To replace the component, reverse the removal procedure.
Expansion boards
Slot Description
1 PCI-X non-hot-plug expansion slot, 64-bit/100-MHz (half-
length)
2 PCI-X non-hot-plug expansion slot, 64-bit/100-MHz (full-
length)
3 PCI Express x4 non-hot-plug expansion slot (full-length)
4 PCI Express x4 non-hot-plug expansion slot (full-length)
5 PCI Express x8 non-hot-plug expansion slot (full-length)
6 PCI Express x4 non-hot-plug expansion slot (full-length)