Configuring the server
For additional information and updates not provided in this
installation sheet, see the HP ProLiant ML150 G6 Server Easy Set-up
CD.
1. Connect the keyboard, mouse, and monitor.
2. To determine the BIOS version:
a. Power up the server.
b. Press the Esc key at the HP logo screen, and then press the
Pause key to halt screen movement.
c. Note the server BIOS version. Verify the server BIOS
version against the latest BIOS version listed for this server
on the HP website: http://www.hp.com
.
d. If necessary, update the BIOS. See the HP ProLiant ML150
G6 Server Maintenance and Service Guide available on
the HP website: http://www.hp.com
.
Identifying server components
Figure 1 Front and rear panel components
Item Description Item Description
1 Media bays 12 System Health LED
2 USB 2.0 ports (2) 13 AC input connector
3 Hard drive bays 1-4 14 Expansion slots
4 Hard drive bays 5-8 15 Keyboard connector
5 Optical drive bay 16 Mouse connector
6 Media eject button 17 Serial port connector
7 Front key lock 18 VGA connector
8 System power button/LED 19 USB 2.0 ports (4)
9 Hard drive activity LED 20 NIC connector
10 NIC2 LED 21 Dedicated NIC port
11 NIC1 LED 22 UID
Figure 2 System board components
Item Description Item Description
1 Processor 1 socket 24
Internal USB connector
2 CPU1_DIMM slot 1D 25 SATA 6_ODD 2 connector
3 CPU1_DIMM slot 2A 26 SATA 5_ODD 1 connector
4 CPU1_DIMM slot 3E 27 SATA 4 connector
To Next Page
Loading...
