4
To remove the SD/SDHC card
Open the battery compartment.1.
Gently push the card until it clicks and pops out.2.
Pull out the card carefully.3.
Charging the battery
The battery that comes along with your package is not fully charged. You need to charge the
battery before using the camera.
Insert the battery into the battery charger.1.
Connect the battery charger to the adaptor.2.
Plug the adaptor to the main outlet.3.
Please charge the battery at least 2.5 hours for the initial use. Beyond the initial use, please
charge your battery until the LED indicator on your charger turns green.
To Next Page
Loading...
Need help?
General
