12 HP Photosmart R-series dock User’s Manual
3 Press the Save/Print button on the camera dock to
start the print dialog. The Print Setup menu displays on the
camera. If you already selected images to print in the
camera, the number of images selected will be shown in the
Print Setup menu. Otherwise, Images: ALL will be
displayed.
4 If all the settings in the Print Setup menu look correct, press
the Menu/OK button on the camera or on the dock remote
control to begin printing. Or, you can change settings in
the Print Setup menu using the arrow keys on the camera or
on the dock remote control, then press Menu/OK to begin
printing.
NOTE There is a print preview in the Print Setup screen
showing the page layout that will be used for printing.
This print preview updates as you change the settings for
Print Size and Paper Size.
5 When the printing completes, you can leave the camera in
the dock to recharge the camera battery.
Displaying Images on a TV
Using the Dock
1 Confirm the following:
• The dock insert for your camera is attached to the top of
the camera dock. (See step 1 on page 6.)
• The audio/video cable is connected between the camera
dock and your TV, and the power cable is plugged into
the dock. (See step 2 on page 7.)
To Next Page
Loading...
Need help?
General
