Remotely Monitor UPSs on
Remotely Monitor UPSs onRemotely Monitor UPSs on
Remotely Monitor UPSs on
the Network
the Networkthe Network
the Network
The optional HP UPS UPS Module features the ability to perform simultaneous network and out-of-band
communications. It enables network administrators to remotely monitor UPSs and reboot network
devices. It provides SNMP functionality, including power event alerts, network power diagnostics, and
remote UPS reboot and testing. Used in conjunction with HP Systems Insight Manager or other SNMP
capable Network Management Software, power-related problems on the network are quickly discovered
and remedied.
Enhanced Front Panel
Enhanced Front PanelEnhanced Front Panel
Enhanced Front Panel
Display
DisplayDisplay
Display
LED and switch membrane integrated into the front panel with power controls and status and load
indicators for easy visibility.
HP R/T3000 UPS Front Panel
HP R/T3000 UPS Front PanelHP R/T3000 UPS Front Panel
HP R/T3000 UPS Front Panel
1.
Dual function LED: Self Test and load indicator (10% load)
7.
Power on button
2.
Dual function LED: Battery fault and Load Indicator (25%
load)
8.
Power off button
3.
Dual function LED: Site wiring fault and load indicator (50%
load)
9.
Test/Alarm reset button
4.
Dual function LED: Over Temperature and load indicator
(75% load)
10.
On bypass indicator
5.
Dual function LED: Overload and load indicator (100%)
11.
On battery indicator
6.
Start on battery button
12.
Utility power indicator
QuickSpecs
HP R/T3000 G2 Uninterruptible Power System (UPS)
HP R/T3000 G2 Uninterruptible Power System (UPS)HP R/T3000 G2 Uninterruptible Power System (UPS)
HP R/T3000 G2 Uninterruptible Power System (UPS)
Standard Features
DA - 14058 Worldwide — Version 2 — July 20, 2011
Page 4
To Next Page
Loading...
Need help?
General
