HP S430c - Front Component Identification

4
Front components
To identify the components on the front of the monitor, use this illustration and table.
Table 1-2 Front components
Control
Function
1
Pop-up webcam
Integrated IR and RGB camera and noise-cancelling microphones.
2
Menu button
Press to open the OSD main menu.
3
Function buttons
Use these buttons to navigate through the OSD menu based on the
indicators above the buttons that are activated while the OSD menu is
open.
NOTE: The function buttons are located under the front bezel edge of
the monitor below the power light.
4
Power button
Turns the monitor on or off.
5
Power light
White: The monitor is powered on.
Amber: The monitor is in a reduced power state because of
inactivity. For more information, see Using Auto-Sleep Mode on
page 27.