USB Type-C #2 port with DP Alt Mode,
USB upstream data, maximum power
delivery up to 65 W, and minimum power
delivery of 45 W
Connects a USB Type-C cable to a source device such as a
computer or game console. This USB Type-C port can function
as a DisplayPort audio/video input or as a USB 3.0 data
connection.
Charges most USB Type-C devices even when the monitor is in
sleep mode.
NOTE: The monitor must be set to Performance Mode. For
detailed instructions, see Changing the Power Mode setting on
page 28.
USB Type-A ports (4) (downstream)
Connect USB cables to peripheral devices, such as a keyboard,
mouse, or USB hard drive, and provide data transfer.
NOTE: The U B Type-C port can also function as a USB port when connected to a USB Type-C port on a source device.
The USB Type-C port can function as a DisplayPort audio/video input, a USB 3.0 upstream connection, or it can
be used to deliver up to 65 watts of power to a device. Power outputs are 5 V, 9 V, 10 V, 12 V, 15 V, and 20 V
with a total maximum output of 65 W and a minimum output of 45 W.
Only devices accepting Non-limited Power Source (as defined in IEC 60950-1 clause 2.5) can be powered from
the USB Type-C port. For a specific equipment list, go to http://www.hp.com/go/hppc-60950-62368.
To Next Page
Loading...
