5 Power management
Shutting down the Slate
CAUTION: Unsaved information will be lost when the Slate is shut down.
The Shut down command closes all open programs, including the operating system, and then turns
off the display and Slate.
Shut down the Slate when the Slate is unused and disconnected from external power for an extended
period.
Although you can shut down the Slate with the power switch, the recommended procedure is to use
the Windows Shut down command.
To shut down the Slate, follow these steps:
NOTE: If the Slate is in the Sleep state or in Hibernation, you must first exit Sleep or Hibernation
before shut down is possible.
1. Save your work and close all open programs.
2. Tap Start.
3. Tap Shut down.
If the Slate is unresponsive and you are unable to use the preceding shut down procedures, try the
following emergency procedures in the sequence provided:
●
Press the Ctrl+alt+del button on the top edge of the Slate, next to the Home button, and then
slide the power switch down.
●
Slide and hold the power switch down for at least 5 seconds.
Shutting down the Slate 33
To Next Page
Loading...
Need help?
General
