HP StorageWorks MSA1000 Quickspecs

QuickSpecs
hp StorageWorks
modular SAN array 1000
specific for Tru64 UNIX and OpenVMS only
DA-11621 Canada — Version 2 — April 15, 2003 10
Configuration Information
STEP 3 – CHOOSE REDUNDANT MSA1000 SYSTEM OPTIONS
Redundant Configuration
msa1000 Controller 218231-B22
NOTE: Redundant configurations require two Host Adapters per server, an additional
controller for each server. Mixin
g
of the msa Fibre Channel I/O Modular and the
msa Hub 2/3 is not supported. When configuring the msa1000 for redundant
controllers use either two msa Fibre Channel I/O Modules, two msa SAN switch
2/8s, or two msa Hub 2/3s.
msa Fibre Channel I/O Module (Includes 2 Gb SFP transceiver) 218960-B21
msa Hub 2/3 (integrated) (Includes two 2Gb SFP transceivers) 286763-B21
msa SAN Switch 2/8 (integrated) (Includes four 2Gb SFP transceivers) 288247-B21

HP StorageWorks MSA1000 Specifications

General

RAID levels	0, 1, 0+1, 5
Certification	Microsoft Cluster Server Certification\\r Hewlett Packard Data Protector\\r VERITAS Backup Exec and NetBackup\\r Legato NetWorker for Windows\\r Computer Associates BrightStor Enterprise Backup
Internal memory	256 MB
Memory clock speed	- MHz
Internal memory type	-
Operating temperature (T-T)	10 - 35 °C
Operating relative humidity (H-H)	10 - 90 %
Supported storage drive interfaces	SCSI
Windows operating systems supported	Yes
Harmonized System (HS) code	84733080

Weight and Dimensions

Depth	52.1 mm
Width	48.3 mm
Height	17.5 mm
Weight	31210 g