To Next PageTo Next Page
Need help?Do you have a question about the HP StorageWorks MSA1000 and is the answer not in the manual?
General| RAID levels | 0, 1, 0+1, 5 |
|---|---|
| Certification | Microsoft Cluster Server Certification\\r Hewlett Packard Data Protector\\r VERITAS Backup Exec and NetBackup\\r Legato NetWorker for Windows\\r Computer Associates BrightStor Enterprise Backup |
| Internal memory | 256 MB |
| Memory clock speed | - MHz |
| Internal memory type | - |
| Operating temperature (T-T) | 10 - 35 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
| Supported storage drive interfaces | SCSI |
| Windows operating systems supported | Yes |
| Harmonized System (HS) code | 84733080 |
Weight and Dimensions| Depth | 52.1 mm |
|---|---|
| Width | 48.3 mm |
| Height | 17.5 mm |
| Weight | 31210 g |
Key requirements and considerations before setting up the MSA1000.
Lists other essential documents for MSA1000 installation and management.
Explains symbols and formatting used in the manual for clarity.
Defines symbols like WARNING, Caution, and Note used for emphasis and information.
Explains safety and operational symbols found on hardware components.
Provides critical safety guidelines for ensuring rack stability during installation.
Offers resources for obtaining technical support and assistance.
Essential planning phase, including research and configuration strategy.
Guidelines for preparing a suitable environment for the MSA1000 installation.
Instructions for ensuring servers are ready and compatible with the MSA1000.
Details the process of installing the Host Bus Adapter (HBA) in servers.
Covers the setup and configuration of network switches and hubs.
Guide for installing optional hardware components into the MSA1000.
Procedures for physically mounting the MSA1000 into a server rack.
Instructions for connecting necessary data and power cables to the MSA1000.
Steps to safely power on the MSA1000 and verify its initial status.
Guidance on customizing the MSA1000 configuration for the operating system.
Step-by-step guide for installing the Host Bus Adapter driver on Windows servers.
Instructions for installing the Array Configuration Utility on the management server.
Process for registering server and OS details with the MSA1000.
Guidance on setting up storage arrays and logical volumes in Windows.
Steps to install the HBA driver for Linux servers, including RPM method.
Guide for installing the Array Configuration Utility on a Linux management server.
Process for registering server and OS details with the MSA1000 in Linux.
Instructions for configuring storage arrays and LUNs in Linux environments.
Procedure for installing the HBA driver on NetWare servers using HPSSCD631.nlm.
Process for registering server and OS details with the MSA1000 in NetWare.
Guidance on configuring storage arrays and LUNs for NetWare.
Details on acquiring necessary Fibre SCSI ECO kits for OpenVMS.
Steps to download the latest MSA1000 firmware file for OpenVMS.
How to retrieve WWPNs for Fibre Channel adapters on OpenVMS.
Guide for installing the Fibre SCSI ECO kit on OpenVMS systems.
Procedures for flashing alternative firmware onto the MSA1000 controller.
Process for registering server and OS details with the MSA1000 in OpenVMS.
Steps for setting up storage arrays and LUNs in OpenVMS.
Guide for assigning unique IDs to MSA1000 controllers and LUNs.
Steps to download the latest MSA1000 firmware file for Tru64 UNIX.
How to retrieve the Node ID of the MSA1000 using the CLI.
Procedures for flashing alternative firmware onto the MSA1000 controller.
Process for registering server and OS details with the MSA1000 in Tru64 UNIX.
Instructions for configuring storage arrays and LUNs in Tru64 UNIX.
