HP StorageWorks MSA1000 User Manual

Configuration Procedures - for NetWare Environments
70 MSA1000 Installation Guide
Installing the HBA Driver on your NetWare Servers
You can install the HBA driver onto your server from the MSA1000 Support
Software CD or from the MSA1000 website. If you need to install the HBA from
the Web, use the instructions provided on the website. To install the HBA driver
from the MSA1000 Support Software CD, use the following instructions.
1. Install the HBA(s), power on the server, and start your NetWare server.
2. Insert the MSA1000 Support Software CD into the CD-ROM drive of the
server.
3. From the system console, mount the CD-ROM drive and enter the following
command:
HPSSCD631:\netware\hpsetup.nlm
where HPSSCD631 is the label of the MSA1000 Support Software CD.
The HP StorageWorks Modular Smart Array 1000 Driver Installation
screen is displayed.
4. Follow the onscreen instructions to complete the driver installation.
5. After the driver is installed, load the NWCONFIG utility.
In the Configuration Options screen, select NCF files Options. Press Enter.
6. Select Edit STARTUP.NCF file and press Enter.
7. At Specify a server boot path (where SERVER.EXE will be), enter
the path.
8. Enter the following Load command for each HBA, using the appropriate slot
number to indicate where the HBAs are inserted in the server:
LOAD QL2300.HAM SLOT = xx /LUNS /ALLPATHS /PORTNAMES
Where xx represents the slot number.
9. Press F10 to save these changes and then return through all previous menus.
10. Remove the MSA1000 Support Software CD from the CD-ROM drive and
restart your NetWare server to load the new drivers.
11. Repeat these procedures for each NetWare server that will access the
MSA1000.

HP StorageWorks MSA1000 Specifications

General

RAID levels	0, 1, 0+1, 5
Certification	Microsoft Cluster Server Certification\\r Hewlett Packard Data Protector\\r VERITAS Backup Exec and NetBackup\\r Legato NetWorker for Windows\\r Computer Associates BrightStor Enterprise Backup
Internal memory	256 MB
Memory clock speed	- MHz
Internal memory type	-
Operating temperature (T-T)	10 - 35 °C
Operating relative humidity (H-H)	10 - 90 %
Supported storage drive interfaces	SCSI
Windows operating systems supported	Yes
Harmonized System (HS) code	84733080

Weight and Dimensions

Depth	52.1 mm
Width	48.3 mm
Height	17.5 mm
Weight	31210 g