What to do if the amber message LED is on in HP StorageWorks XP10000?
If the amber message LED on the disk array control panel is illuminated, it indicates an issue that requires attention. The suggested solution is to contact HP to determine the reason for the message.
General| Product Type | Disk array system |
|---|---|
| Drive Types Supported | Fibre Channel, SATA |
| Maximum Number of Drives | 1152 |
| Power Supply | Redundant power supplies |
| Dimensions | Varies by configuration |
| Weight | Varies by configuration |
| Form Factor | Rack-mounted |
| RAID Levels Supported | RAID 1, RAID 5 |
| Host Interfaces | Fibre Channel |
| Cache Memory | Up to 64 GB |
| Operating System Support | HP-UX, Linux, Windows, IBM AIX, Sun Solaris |
| Data Backup Type | Snapshot |
| Controller Type | Dual active-active controllers |
Details the intended audience, prerequisites, firmware versions, and related documentation.
Explains document conventions, HP technical support, and helpful web resources.
Introduces BC, its overview, components, pairs, threshold, cascade, and software.
Outlines operational requirements, pair limits, and differential table calculations for BC.
Covers setting/resetting reserve attributes and creating/managing BC pairs and initial copy.
Explains pairsplit operations, copy pace, split types, and pairresync operations.
Details procedures for suspending (Pairsplit-E) and deleting (Pairsplit-S) BC pairs.
Describes Swap&Freeze and Host I/O Performance options for BC.
Explains creating cascaded pairs (L1 and L2) for multiple copies of a primary volume.
Describes the At-Time Split function for consistent group splits using RAID Manager.
Details BC pair status conditions, transitions, and their impact on operations.
Explains how to view current BC pair status and operation history using the History pane.
Lists BC error codes, their descriptions, and corrective actions for resolving issues.
Covers system requirements and combining BC with other data management operations.
Explains copying access attributes and LUN Security XP Extension license capacity.
Guides on starting BC, using the main screen, tree view, and volume lists.
Details usage of Detail, S-Vol Path, Display Filter, and Preset Volume list windows.
Covers setting and resetting reserve attributes for BC volumes.
Provides detailed steps for paircreate, pairsplit, and pairresync operations.
Details the procedures for suspending (Pairsplit-E) and deleting (Pairsplit-S) BC pairs.
Explains calculating differential tables and maximum pair limits for BC.
Details calculations for mainframe and open-system volume migration differential tables.
To Next Page
