Business Copy XP user guide for the XP10000/XP12000 63
pairs (see ”Creating and splitting pairs” on page 66). To open the Pairsplit window, select volumes or
pairs in the Volume list on the BC main screen, right-click the selected volumes or pairs, and click Pairsplit.
Figure 35 Pairsplit window
The Pairsplit window consists of the following components:
• ”Pairsplit Volume List” on page 63
• ”Window options” on page 64
• ”Select S-Vol box” on page 64
• ”Buttons” on page 65
• ”Splitting pairs” on page 65
• ”Creating and splitting pairs” on page 66
Pairsplit Volume List
This list in the upper half of the Pairsplit window displays the following information about the P-VOL and
S-VOL of the pair you want to split:
• Port: Port ID (cluster and channel number) of the P-VOL
• Group (G-ID): Host group ID of the P-VOL
• (Path) LUN: CU:LDEV of the P-VOL
NOTE: An LDEV number ending with # (for example, 00:01#) indicates the LDEV is an external
volume.
• MU: MU number of the P-VOL
• Status: Status of the P-VOL
• Port: Port ID (cluster and channel number) of the first S-VOL of each volume pair
• Group (G-ID): Host group ID of the S-VOL
To Next Page
Loading...
