HP StorageWorks MSA1000 User Manual

Installation Procedures - for all MSA1000 Deployments
33MSA1000 Installation Guide
Attaching the Rails in the Rack
Note: When installing items in your rack, follow industry-standard recommendations,
including:
■ Locate the heaviest items, such as uninterruptable power supplies (UPS) and
additional storage enclosures near the bottom of the rack.
■ Locate the MSA1000 near the bottom of the rack, but high enough to easily read
the LCD panel on the front of the unit.
■ Install the hard drives into the MSA1000 and storage enclosures after installing the
MSA1000 and enclosure chassis into the rack.
1. Use the instructions provided on the rack template to mark the rack for rail
locations.
Figure 5: Using the rack template
Note: Identify the left (L) and right (R) rack rails by markings stamped into the rails.

HP StorageWorks MSA1000 Specifications

General

RAID levels	0, 1, 0+1, 5
Certification	Microsoft Cluster Server Certification\\r Hewlett Packard Data Protector\\r VERITAS Backup Exec and NetBackup\\r Legato NetWorker for Windows\\r Computer Associates BrightStor Enterprise Backup
Internal memory	256 MB
Memory clock speed	- MHz
Internal memory type	-
Operating temperature (T-T)	10 - 35 °C
Operating relative humidity (H-H)	10 - 90 %
Supported storage drive interfaces	SCSI
Windows operating systems supported	Yes
Harmonized System (HS) code	84733080

Weight and Dimensions

Depth	52.1 mm
Width	48.3 mm
Height	17.5 mm
Weight	31210 g