HP StorageWorks MSA1000 User Manual

Configuration Procedures - for Windows Environments
60 MSA1000 Installation Guide
Identifying the Server and Operating System to the MSA1000
Because the MSA1000 can operate in a variety of operating system environments,
you must identify your server to the MSA1000. These identification steps include
changing the name of the connection to the server to a meaningful name and
identifying your server’s operating system.
Identify the connection to the server and its operating system using the same
utility you will later use to configure the storage.
For information on identifying your server using the ACU, see the “Selective
Storage Presentation” section in the HP StorageWorks Array Configuration Utility
User Guide. This guide is available on the MSA1000 Support Documentation CD
and the ACU website at
http://h18000.www1.hp.com/products/servers/proliant
storage/software-management/acumatrix/index.html .
For information on identifying your server using the CLI, see the “Managing
Connection Profiles” section of the HP StorageWorks Modular Smart Array 1000
Command Line Interface Reference Guide. This guide is available on the
MSA1000 Support Documentation CD and the MSA1000 website at
http://www.hp.com/go/msa1000 .
Note: The ACU does not allow the connection name and the profile type to be
changed at the same time. These values must be changed separately.

HP StorageWorks MSA1000 Specifications

General

RAID levels	0, 1, 0+1, 5
Certification	Microsoft Cluster Server Certification\\r Hewlett Packard Data Protector\\r VERITAS Backup Exec and NetBackup\\r Legato NetWorker for Windows\\r Computer Associates BrightStor Enterprise Backup
Internal memory	256 MB
Memory clock speed	- MHz
Internal memory type	-
Operating temperature (T-T)	10 - 35 °C
Operating relative humidity (H-H)	10 - 90 %
Supported storage drive interfaces	SCSI
Windows operating systems supported	Yes
Harmonized System (HS) code	84733080

Weight and Dimensions

Depth	52.1 mm
Width	48.3 mm
Height	17.5 mm
Weight	31210 g