HP StorageWorks MSA1000 User Manual

Installation Procedures - for all MSA1000 Deployments
52 MSA1000 Installation Guide
To Determine Which Version of the MSA1000 Support Software CD to Use
To determine if you can use the MSA1000 Support Software CD that was
included in the shipping carton with your MSA1000 or if you need to download
and create a new CD from the Web:
1. Obtain the MSA1000 Support Software CD from the shipping carton of your
MSA1000.
2. Read the CD label and record the version of the Support Software CD in
“My MSA1000 Worksheets” on page 97 of this guide.
3. Go to the Software, Firmware & Drivers page of the MSA1000 website at
http://www.hp.com/go/msa1000 .
4. Under the Software banner, select MSA1000 Support Software CD.
5. Read the screen display for the Web-version of the Support Software CD and
record the Web-version of the CD in Appendix C: “My MSA1000
Worksheets” on page 97 of this guide.
6. If the Web-version of the Support Software CD is a higher number than the
version provided with your MSA1000, follow the instructions provided on the
website to create a new Support Software CD.
7. When instructed in later sections of this guide, insert this new Support CD
into the CD-ROM drive of your server.

HP StorageWorks MSA1000 Specifications

General

RAID levels	0, 1, 0+1, 5
Certification	Microsoft Cluster Server Certification\\r Hewlett Packard Data Protector\\r VERITAS Backup Exec and NetBackup\\r Legato NetWorker for Windows\\r Computer Associates BrightStor Enterprise Backup
Internal memory	256 MB
Memory clock speed	- MHz
Internal memory type	-
Operating temperature (T-T)	10 - 35 °C
Operating relative humidity (H-H)	10 - 90 %
Supported storage drive interfaces	SCSI
Windows operating systems supported	Yes
Harmonized System (HS) code	84733080

Weight and Dimensions

Depth	52.1 mm
Width	48.3 mm
Height	17.5 mm
Weight	31210 g