HP StorageWorks MSA1000 User Manual

Installation Procedures - for all MSA1000 Deployments
56 MSA1000 Installation Guide
Customize your Installation for your Operating System
With your MSA1000 physically installed, you must now perform a few additional
configuration procedures,
But because these procedures vary for each operating system, they are not listed in
this section.
Browse through the remaining chapters of this guide and locate the chapter for
your operating system.
■ Chapter 2: Configuration Procedures - for Windows Environments, page 57
■ Chapter 3: Configuration Procedures - for Linux Environments, page 63
■ Chapter 4: Configuration Procedures - for NetWare Environments, page 69
■ Chapter 5: Configuration Procedures - for OpenVMS Environments, page 73
■ Chapter 6: Configuration Procedures - for Tru64 UNIX Environments,
page 81
To finish installing and configuring your MSA1000, perform the procedures in
the chapter for your operating system.

HP StorageWorks MSA1000 Specifications

General

RAID levels	0, 1, 0+1, 5
Certification	Microsoft Cluster Server Certification\\r Hewlett Packard Data Protector\\r VERITAS Backup Exec and NetBackup\\r Legato NetWorker for Windows\\r Computer Associates BrightStor Enterprise Backup
Internal memory	256 MB
Memory clock speed	- MHz
Internal memory type	-
Operating temperature (T-T)	10 - 35 °C
Operating relative humidity (H-H)	10 - 90 %
Supported storage drive interfaces	SCSI
Windows operating systems supported	Yes
Harmonized System (HS) code	84733080

Weight and Dimensions

Depth	52.1 mm
Width	48.3 mm
Height	17.5 mm
Weight	31210 g