HP StorageWorks MSL2024 - Back Panel Overview: Parallel SCSI; Back Panel Overview: Fibre Channel (FC); Back Panel Overview: SAS

Back panel overview: parallel SCSI
2. Fan1. Parallel SCSI connector
4. Tape drive assembly3. Power connector
6. Serial port (Factory use only)5. Ethernet port
8. Magazine release hole7. USB port
10. Tape drive assembly LED
9. Pull-out tab containing
product information
NOTE:
The overview of libraries with full-height SCSI drives is similar
to that of libraries with half-height SCSI drives, shown above.
Back panel overview: SAS
2. Fan1. SAS port
4. Tape drive assembly3. Power connector
6. Serial port (Factory use only)5. Ethernet port
8. Magazine release hole7. USB port
10. Tape drive assembly LED
9. Pull-out tab containing product
information
Back panel overview: Fibre Channel (FC)
2. Fan1. FC ports
4. Tape drive assembly3. Power connector
6. Serial port (Factory use only)5. Ethernet port
8. Magazine release hole7. USB port
10. Tape drive assembly LED
9. Pull-out tab containing
product information
Optional: Tabletop conversion cover
The Library should only be either installed into a rack with the enclosed
rails or installed into the optional tabletop conversion cover and set on
a flat surface.
Page 2