HP StorageWorks P2000 - G3 MSA Array Systems

HP StorageWorks P2000 G3 MSA System FC User Guide 57
A LED descriptions
Front panel LEDs
LED Description Definition
1 Enclosure ID Green — On
Enables you to correlate the enclosure with logical views presented
by management software. Sequential enclosure ID numbering of
controller enclosures begins with the integer 1. The enclosure ID for
an attached drive enclosure is nonzero.
2 Disk drive Online/Activity See Table 13 on page 58, Disk drive LED combinations.
3 Disk drive Fault/UID See Table 13 on page 58, Disk drive LED combinations.
4 Unit Identification (UID) Blue — Identified.
Off — Identity LED off.
5 Heartbeat Green — The enclosure is powered on with at least one power
supply operating normally.
Off — Both power supplies are off; the system is powered off.
6 Fault ID Amber — Fault condition exists. The event has been identified, but
the problem needs attention.
Off — No fault condition exists.
P2000
1
4
7
10
3
6
9
12
1 2 3
Left ear Right ear
4
5
6
P2000
Left ear Right ear
4
5
6
312