Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 146.
Table 146 Set Fibre Address Operation
DescriptionItem
The name of the port that the fibre address has been set.Port
The address of Fibre Channel port after change using a number from 1 to 126.
See Table 187 on page 212 for relation of number and Fibre Channel port address.
Fibre Addr.
The number of ports where address has been set.Num. of Ports
Set Fibre Topology Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],Set Fibre Topology,,Normal end,,,Seq.=xxxxx
+{Port,Fabric,Connection}=[{XX,Enable,FC-AL},{XX,Disable,FC-AL},{XX,Enable,P-to-P},
{XX,Disable,P-to-P}],Num. of Ports=4
[Install]
Install function
Set Fibre Topology
Set Fibre Topology operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 147.
Table 147 Set Fibre Topology Operation
DescriptionItem
The name of the port where the topology of Fibre Channel is set.Port
Indicates whether the Fabric switch is enabled or disabled.
Enable: Enabled, Disable: Disabled
Fabric
The connecting mode of the Fabric switch selected.
FC-AL: FC-AL is selected, P-to-P: P-to-P is selected
Connection
The number of ports where the topology of Fibre Channel is set.Num. of Ports
XP24000/XP20000 Audit Log User and Reference Guide 181
To Next Page
Loading...
