Set Host Mode Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],Set Host Mode,,Normal end,,,Seq.=xxxxx
+{Port,HostGrpID,Mode,option[0:31],Option[32:63],Option[64:95]}=[{XX,0xXXX,
0x00,0xXXXXXXXX,
0xXXXXXXXX,0xXXXXXXXX},{XX,0xXXX,0x4F,0xXXXXXXXX,0xXXXXXXXX,0xXXXXXXXX}],
Num. of Host Groups=2
[Install]
Install function
Set Host Mode
Set Host Mode operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 148.
Table 148 Set Host Mode Operation
DescriptionItem
The name of the port where the host group is created.Port
The host group number.HostGrpID
The host mode set. See the HP StorageWorks XP24000/XP20000 LUN Manager User's
Guide for the meaning of the host mode number.
Mode
The host mode option set. Hexadecimal values are output. See Table 189 on page 215
for the relation of output values and host mode option.
Option[0:31]
Option[32:63]
Option[64:95]
The number of host groups that the host mode setting is changed.
Num. of Host
Groups
Set IP Address Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],Set IP Address,SVP&DKC,Normal end,,,Seq.=xxxxx
+{IP Address,Subnet Mask}={(123.456.789.123),(255.255.255.255)}
+Use Duplex= Valid
+SVP Kind= Master SVP
+IPv4=Valid
+IPv6=Valid
+{ M-SVP IPv4(IP Address,Subnet Mask),IPv6(IP Address,Subnet Prefix)}={((111.222.333.444),
(255.255.255.255)),((1111:2222:3333:4444:5555:6666:7777:8888),64)}
+{ S-SVP IPv4(IP Address,Subnet Mask),IPv6(IP Address,Subnet Prefix)}={((555.666.777.888),
(255.255.255.255)),((9999:AAAA:BBBB:CCCC:DDDD:EEEE:FFFF:0000),64)}
[Install]
Install Function182
To Next Page
Loading...
