Set Class Threshold Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Auto LUN], Set Class Threshold,,Normal end,,,
Seq.=xxxxx
+{ClassName,AvailabilityMax(%)}=[{A,100},{B,100},{C,100},{D,100},{E,100},{F,100}]
Num. of Classes = 6
[Auto LUN]
HP XP Auto LUN Software function
Set Class Threshold
Set Class Threshold operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 291.
Table 291 Set Class Threshold Operation
DescriptionItem
The class name of the HDD whose threshold is changed.
The class name is displayed in the alphabet from A to J.
ClassName
The threshold (the upper limit of the disk usage rate) after it changes.
The threshold is displayed by the number from 0 to 100. The unit is percent (%).
AvailabilityMax(%)
The number of HDD classes whose threshold is changed.Num. of Classes
Set Fixed PG Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Auto LUN], Set Fixed PG,,Normal end,,,Seq.=xxxxx
+{Type, PG}=[{Release,1-1},{Release,1-2},{Release,1-3},{Release,1-4},{Release,1-6},
{Release,2-1},{Release,2-2},{Release,2-3}] Num. of PGs = 8
[Auto LUN]
HP XP Auto LUN Software function
Set Fixed PG
Set Fixed PG operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
XP Auto LUN Software Function316
To Next Page
