Steady blue: identifies the unit
Off: No power connected
4. UID button Steady blue identifies the StoreOnce Backup system in the rack.
Flashing blue: remote management or firmware upgrade in
progress
5. System Insight Display The HP systems Insight Display LEDs represent the system board
layout and may be useful for troubleshooting. See the maintenance
and service guide for details.
6. Hot plug drives These drives contain the operating system and file system. They
are not used for data storage.
Figure 29: Rear view of the HPE StoreOnce 4900 Backup server
1. RAID card 1 2. FC card 1
3. FC card 2 4. RAID card 2
5. 10GbE card 1 6. 10GbE card 2
7. Power supply 1 8. Power supply 2
9. USB ports 10. Video/monitor port
11. iLO4 Management port (do not use for
data connection)
12. Serial connector
13. 1GbE network port 1 (used with Quick
Install option)
14. 1GbE network ports 2, 3 and 4
StoreOnce Backup system LEDs 61
To Next Page
Loading...
