a. Flex the inside edges of the top edge (1), the left and right sides (2), and the bottom edge (3) of
the display bezel until the bezel disengages from the display back cover.
b. Remove the display bezel (4).
The display bezel is available using spare part number L02784-001.
5. If it is necessary to replace the display panel:
a. Remove the two Phillips PM2.0×3.3 screws that secure the LCD bracket to the display back cover
(1), and then remove the LCD bracket (2).
The LCD bracket is available using spare part number L02789-001.
Component replacement procedures 37
To Next Page
Loading...
