4. Remove the four Phillips PM2.5×8.0 screws (2).
To install the rubber feet, ret them on the adhesive backing.
NOTE: The bottom of the computer feet are ribbed. These ribs are designed to t only one way in the
grooves that are in the enclosure. Make sure the feet are positioned in those grooves when reinstalling the
feet.
Keyboard/top cover
Description Spare part number Description Spare part number
For use in Africa (French) L02776-FP1 For use in Latin America L02776-161
For use in Belgium L02776-A41 For use in the Netherlands L02776-B31
For use in Bulgaria L02776-261 For use in Portugal L02776-131
For use in Canada (English) L02776-DB1 For use in Romania L02776-271
For use in the Czech Republic and
Slovenia
L02776-FL1 For use in Russia L02776-251
For use in Denmark, Finland, and
Norway
L02776-DH1 For use in Saudi Arabia L02776-171
For use in France L02776-051 For use in Slovenia L02776-BA1
For use in Germany L02776-041 For use in Spain L02776-071
For use in Greece L02776-151 For use in Switzerland L02776-BG1
For use in Hungary L02776-211 For use in Turkey L02776-141
For use in Israel L02776-BB1 For use in the United Kingdom L02776-031
Component replacement procedures 21
To Next Page
Loading...
