HP t5740e - Thin Client User Manual

2 Hardware Changes
General Hardware Installation Sequence
To ensure the proper installation thin client hardware components:
1. Back up any data, if necessary.
2. If the thin client is powered on:
a. Turn the unit and any other attached devices off.
b. Disconnect the power cord from the wall outlet.
c. Disconnect any external devices or cables, such as an antenna or cable lock.
WARNING! To reduce the risk of personal injury from electrical shock and/or hot surfaces, be
sure to disconnect the power cord from the wall outlet and allow the internal system components
to cool before touching.
WARNING! To reduce the risk of electrical shock, fire, or damage to the equipment, do not
plug telecommunications or telephone connectors into the network interface controller (NIC)
receptacles.
CAUTION: Static electricity can damage the electronic components of the thin client or
optional equipment. Before beginning these procedures, ensure that you are discharged of static
electricity by briefly touching a grounded metal object. See
Electrostatic Discharge on page 32
for more information.
3. Remove the secure USB compartment cover. See Removing and Replacing the Secure USB
Compartment Cover on page 12 for more information.
4. Remove the stand, if it is installed. See
Removing the Stand on page 6 for more information.
5. Remove the side access panel and metal side cover. See
Removing and Replacing the Side
Access Panel and Metal Side Cover on page 14 for more information.
6. Remove any hardware that you will replace.
7. Install or replace equipment. For removal and replacement procedures, see the following
sections:
●
Installing the USB Device on page 17
●
Installing the PCI Express Expansion Module and PCI Express Card on page 21
●
Removing and Replacing the Battery on page 17
●
Installing a Secondary Flash Memory Module on page 18
●
Installing a Second SO-DIMM on page 19
NOTE: Option kits include more detailed installation instructions.
8. Replace the side access panel and metal side cover. See Removing and Replacing the Side
Access Panel and Metal Side Cover on page 14 for more information.
ENWW
General Hardware Installation Sequence
11

HP t5740e - Thin Client Specifications

General

Brand	HP
Model	t5740e - Thin Client
Category	Server
Language	English