HP u818x - Menu Items; Using the Menu; Adjusting the Settings

40
6 Adjusting the Settings
6.1 Using the Menu
You can customize the general settings via the on-screen display (OSD) menus.
1. Press the button to enter the OSD menu.
2. Press the / button to select menu item, and then press the
OK
button for entering function menu.
3. Press the / button to select or adjust the value, and then press
the
OK
button to confirm setting.
4. Press the button to return recording screen.
6.2 Menu Items
Refer to the below table for details of main menu and function list.
Menu option Description Available option
Playback
Select the file category that you
want to view.
Video
Emergency
Picture
Satellite Status
Displays the current state of the
satellite reception.
Wi-Fi
Set up Wi-Fi linkage of a mobile
phone.
On / Off
Speed Unit
The system displays the speed
setting unit.
KM/H / MPH
Speed Cam Alert
If the Speed Cam Alert function is
enabled, once your car’s location is
determined by GPS and approaches
a speed cam, this product produces
audible alert and screen message.
On / Off
Speed Position
Management
Delete Last Position:
Delete the
last speed camera point.
Delete All Position:
Delete all speed camera point.
Delete Last Position / Delete All
Position
Speed Limit Alert
Set a customized maximum speed
limit. When the vehicle speed
exceeds the maximum, an audible
alert is automatically triggered and
a warning message is displayed on
the screen.
Press the / button to set
the speed limit. You can set the
off, or set speed limit from 50 to
200km/h (30 to 125mph)