HP UPS R/T3000 User Manual

Installation 16
2.
Insert screws through the rack into the mounting rail and the front of each mounting bracket.
3. Install cage nuts or clip nuts into the rear of the rack.

HP UPS R/T3000 Specifications

General

Power Capacity	3000 VA / 2700 W
Battery Type	Sealed Lead-Acid (SLA)
Rack Size	2U
Frequency	50/60 Hz
Operating Humidity	5% to 95% non-condensing
Form Factor	Rack/Tower
Output Voltage	230 VAC
Interface	USB, Serial
Output Connector(s)	IEC 320 C13, C19
Transfer Time	4 ms typical
Operating Temperature	0°C to 40°C
Battery Recharge Time	3 hours