To register journal volumes
1. In Remote Web Console, select Actions > Remote Copy > Continuous Access Journal Z >
Journal Operation. The Journal Operation window is displayed.
2. Click to change the mode from View to Modify.
3. To register journal volumes in an existing journal, select the journal from the Registered tree.
To register journal volumes in a new journal, select the journal from the Free tree.
The selected journal displays in the data pane.
Only mirrors of journals with either of the following can be registered:
Status: Blank, Initial, Active, Stopped, Hold, Holding, or Hold(Failure).
4. Right-click the selected journal then select Edit Journal Volumes from the menu. The Edit Journal
Volumes dialog box displays.
Register journal volumes in a journal 63
To Next Page
Loading...
