HP Z200 - Small Form Factor Workstation Setup And Configuration Guide

30
o TLS Provisioning Mode
o Provisioning IP
o Date of Provisioning
The provisioning record for a system with PKI provisioning will include the
following information:
o TLS Provisioning Mode
o DNS
o Host Initiated
o Hash Data
o Hash Algorithm
o Serial Number
o ISDefault Bit
o Time Validity Pass
o FQDN
o Provisioning IP
o Date of Provisioning
This option is only for display, no changes can be made here.
c. Provisioning Server IPV4/IPV6.
Enter Provisioning Server IPV4/IPV6 address
Default Setting : 0.0.0.0
Recommended Setting : Network Dependent
This option is used in Enterprise mode when an Intel AMT Setup and
Configuration (Provisioning) Server is available. It points to the IP address of
the SCS.
If the IP is left as the default, the ME will look for “ProvisionServer” on DNS.
The default port for many SCS is at 9971.
Some ISV’s may require additional settings, such as the SCS port number and
SCS IP address. Contact your Management Console ISV for more details.
d. Provisioning Server FQDN.
Enter Provisioning Server FQDN
Default Setting : None
Recommended Setting : Network Dependent
This option is used in Enterprise mode when an Intel AMT Setup and
Configuration (Provisioning) Server is available. It points to the FQDN (Fully
Qualified Domain Name) of the SCS.
e. Go into TLS PSK.

HP Z200 - Small Form Factor Workstation Specifications

General

Brand	HP
Model	Z200 - Small Form Factor Workstation
Category	Desktop
Language	English