HP Z230 SFF Workstation

HP DisplayPort to Dual Link DVI
Adapter
Y Y NR078AA 1
Entry 3D
AMD FirePro V3900 1GB Graphics Y Y A6R69AA 1 NO
NVIDIA Quadro 410 512MB Graphics Y Y A7U60AA 1 NO
NVIDIA Quadro K600 1GB Graphics Y Y C2J92AA 1 NO
Note 1: Intermixing integrated Intel HD graphics and discrete graphics cards in order to drive more than
three displays can be enabled using the Computer (F10) Setup Utility. However, HP recommends using only
discrete graphics when four or more displays are required to be supported. Utility. However, HP
recommends using only discrete graphics cards when four or more displays are required to be supported.
Memory Sub-Section Description/Notes
Intel® Xeon E3, Intel Core i3 and Intel Pentium processors can support either ECC or non-ECC memory;
Intel® Core i5/i7 processors only support non-ECC memory.
CTO Support Notes
DDR3-1600 nECC Unbuffered DIMMs CTO
HP 32GB (4x8GB) DDR3-1600 nECC RAM
HP 16GB (2x8GB) DDR3-1600 nECC RAM
HP 16GB (4x4GB) DDR3-1600 nECC RAM
HP 8GB (2x4GB) DDR3-1600 nECC RAM
HP 4GB (1x4GB) DDR3-1600 nECC RAM
DDR3-1600 ECC Unbuffered DIMMs - CTO
HP 32GB (4x8GB) DDR3-1600 ECC RAM
HP 16GB (2x8GB) DDR3-1600 ECC RAM
HP 16GB (4x4GB) DDR3-1600 ECC RAM
HP 8GB (2x4GB) DDR3-1600 ECC RAM
HP 8GB (1x8GB) DDR3-1600 ECC RAM
HP 4GB (2x2GB) DDR3-1600 ECC RAM
HP 4GB (1x4GB) DDR3-1600 ECC RAM
Sub-Section Description/Notes
Two channels of DDR3 memory are supported. To realize full performance at least one DIMM must be
inserted into each channel.
The CPUs determine the speed at which the memory is clocked. If a 1333 MHz capable CPU is used in the
system, the maximum speed the memory will run at is 1333 MHz regardless of the specified speed of the
memory.
AMO Option Kit Part
Number
Support Notes
DDR3-1600 nECC Unbuffered DIMMs AMO
HP 8GB (1x8GB) DDR3-1600 non-ECC RAM B1S54AA
HP 4GB (1x4GB) DDR3-1600 nECC RAM B1S53AA
DDR3-1600 ECC Unbuffered DIMMs - AMO
QuickSpecs
HP Z230 SFF Workstation
Supported Components
DA - 14630 Worldwide — Version 14 — April 1, 2014 Page 10