●
For HDMI digital operation (Z27i and Z30i models only), connect the HDMI signal cable to
the HDMI connector on the rear of the monitor and the other end to the HDMI connector on
the computer (cable provided with select models).
4. Connect one end of the provided USB cable to the USB hub connector on the rear panel of the
computer, and the other end to the upstream USB connector on the monitor.
NOTE: The Z24i model supports USB 2.0. The Z27i and Z30i models support USB 3.0.
8 Chapter 2 Setting Up and Using the Monitor
To Next Page
Loading...
