To Next Page

To Previous Page

8. Press the - (Minus) or + (Plus) button to adjust the minutes.

9. Press the OK button to lock in the time chosen.

10. After setting the current time, the highlight automatically skips to Set Sleep Time. Repeat steps

6 through 9 to set Sleep Time.

11. If you do not want to set Sleep Time, press the OK button twice, then select Save and Return

to exit the menu.

12. After setting Sleep Time, the highlight automatically skips to Set On Time. Repeat steps 6

through 9 to set On Time.

13. Set the Timer to On to activate the Sleep Timer settings.

14. When you are finished, select Save and Return to exit the menu.

The fifth selection, Sleep Now, turns the monitor backlights off immediately and stays in sleep mode

until the next On Time activates or a monitor button is pressed.

24 Chapter 2 Setting Up and Using the Monitor

Other manuals for HP Z24i

Questions and Answers:

Need help?

Do you have a question about the HP Z24i and is the answer not in the manual?

General