Attaching the VESA mounting bracket
A VESA mounting bracket is included with the monitor for use when attaching the monitor to a wall, swing
arm, or other mounting xture.
1. Remove the monitor stand. Refer to Removing the monitor stand on page 6.
2. Position the VESA bracket so that the connector slot on the bracket is aligned with the connector slot on
the monitor.
3. Press the VESA bracket onto the monitor until it clicks into place.
4. To attach the monitor to a swing arm or other mounting device, insert four mounting screws through the
holes on the mounting device and into the screw holes on the VESA bracket.
IMPORTANT: Follow the mounting device manufacturer’s instructions when mounting the monitor to a
wall or swing arm.
IMPORTANT: For optimal monitor performance and screen clarity, do not rotate the monitor 90
degrees to portrait orientation.
Setting up the monitor 7
To Next Page
Loading...
