HP Z6100 - DesignJet Color Inkjet Printer

Working with non-hp papers –Version for firmware 3.x
Here are the different steps you will have to follow in order to use any non-HP paper with your
Z6100 printer series:
This paper in the “List of
non-HP papers and
recommended settings”?
Yes
Note
yellow shaded boxes require user interaction
User wants to print on a
non-HP paper with Z6100
printer
Look at recommended
front-panel setting
Recommended setting
appears in the ‘Custom’
category?
Yes
Download paper presets
and install them on printer
Load non-HP paper in
Z6100
Go to “Selecting the
paper presets that best
matches your needs”
No
See page 3
See page 5
Select a paper type
Selected paper type
inside the ‘Custom’
category?
No
Select paper type inside
‘Custom’ category on
printer front panel
Load non-HP paper in
Z6100
Select paper type inside a
standard category on
printer front panel
See
page 9
Download paper presets
and install them on printer
Load non-HP paper in
Z6100
Select paper type inside
‘Custom’ category on
printer front panel
No
Load non-HP paper in
Z6100
Select paper type inside a
standard category on
printer front panel
Yes
Calibrate and
Install/create ICC profile
Go to page 12,
case 1 or 2
Go to page 12
case 3 or 4
Calibrate and
Install/create ICC profile
Fase 1: Paper settings selection
Fase 2: Calibration, profiling
Launch HP Color Center Launch HP Color Center
See
page 9
Hewlett-Packard
2