CAUTION: Before turning the display panel upside down, make sure the work surface is clear of
tools, screws, and any other foreign objects. Failure to follow this caution can result in damage to
the display panel.
b. Lift the top edge of the display panel (2) and swing it up and forward until it rests upside down in
front of the display enclosure.
c. Lift the tape (1), and then disconnect the display panel cable (2) from the display panel.
d. Remove the display panel display panel (3).
6. If it is necessary to replace the webcam module or microphone module:
70 Chapter 6 Removal and replacement procedures for authorized service provider parts
To Next Page
Loading...
