To Next Page

To Previous Page

To exit Computer Setup menus, choose one of the following methods:

●

To exit Computer Setup menus without saving your changes:

Select the Exit icon in the lower-right corner of the screen, and then follow the on-screen instructions.

– or –

Select Main, select Ignore Changes and Exit, and then press enter.

●

To save your changes and exit Computer Setup menus:

Select the Save icon in the lower-right corner of the screen, and then follow the on-screen instructions.

– or –

Select Main, select Save Changes and Exit, and then press enter.

Your changes go into eect when the computer restarts.

Restoring factory settings in Computer Setup

NOTE: Restoring defaults will not change the hard drive mode.

To return all settings in Computer Setup to the values that were set at the factory, follow these steps:

1. Start Computer Setup. See Starting Computer Setup on page 150.

2. Select Main, and then select Apply Factory Defaults and Exit.

NOTE: On select products, the selections may display Restore Defaults instead of Apply Factory

Defaults and Exit.

3. Follow the on-screen instructions.

4. To save your changes and exit, select the Save icon in the lower-right corner of the screen, and then

follow the on-screen instructions.

– or –

Select Main, select Save Changes and Exit, and then press enter.

Your changes go into eect when the computer restarts.

NOTE: Your password settings and security settings are not changed when you restore the factory settings.

Updating the BIOS

Updated versions of the BIOS may be available on the HP website.

Most BIOS updates on the HP website are packaged in compressed les called SoftPaqs.

Some download packages contain a le named Readme.txt, which contains information regarding installing

and troubleshooting the le.

Determining the BIOS version

To decide whether you need to update Computer Setup (BIOS), rst determine the BIOS version on your

computer.

BIOS version information (also known as ROM date and System BIOS) can be accessed by pressing fn+esc (if

you are already in Windows) or by using Computer Setup.

Using Computer Setup 151

Questions and Answers:

Need help?

Do you have a question about the HP ZBook Studio G5 and is the answer not in the manual?

HP ZBook Studio G5 Specifications

General

Form factor	Clamshell
Product type	Mobile workstation
Product color	Gray
Country of origin	China
Market positioning	Performance
LED backlight	Yes
RGB color space	NTSC
Display diagonal	15.6 \
Display brightness	400 cd/m²
Native aspect ratio	16:9
Maximum refresh rate	72 Hz
Bus type	DMI
Processor cache	12 MB
Processor cores	6
Processor model	E-2176M
Processor frequency	2.7 GHz
Processor cache type	Smart Cache
Configurable TDP-down	35 W
Processor manufacturer	Intel
Processor boost frequency	4.4 GHz
Configurable TDP-down frequency	2.2 GHz
Discrete GPU manufacturer	NVIDIA
Discrete graphics card model	NVIDIA® Quadro® P1000
On-board graphics card model	Intel UHD Graphics P630
Discrete graphics card memory	4 GB
Discrete graphics memory type	GDDR5
Memory slots	2x SO-DIMM
Internal memory	32 GB
Memory clock speed	2666 MHz
Internal memory type	DDR4-SDRAM
Maximum internal memory	- GB
Memory layout (slots x size)	2 x 16 GB
SSD capacity	The Solid State Drive's storage capacity in Gigabytes.
SSD interface	NVMe, PCI Express
Storage media	SSD
SSD form factor	M.2
Total storage capacity	512 GB
Compatible memory cards	SD
Number of SSDs installed	1
Front camera HD type	HD
Antenna type	2x2
Bluetooth version	5.0
Top Wi-Fi standard	Wi-Fi 5 (802.11ac)
WLAN controller model	Intel Dual Band Wireless-AC 9560
USB 2.0 ports quantity	0
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	2
Pointing device	Clickpad
Operating system architecture	64-bit
HP segment	Business
Battery capacity	95.6 Wh
AC adapter power	150 W
Sustainability certificates	ENERGY STAR
Intel Identity Protection Technology version	1.00