EasyManuals Logo

HP ZR2240w User Manual

HP ZR2240w
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
3 Setting Up the Monitor
To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other
attached devices, then follow the instructions below.
NOTE: Be sure the master power switch, located on the rear panel of the monitor, is in the off
position. The master power switch turns off all power to the monitor.
Installing the Pedestal
NOTE: Do not install the pedestal if the monitor will be used on a wall, swing arm, or other mounting
fixture; instead see
Mounting the Monitor to User-Supplied Support Hardware on page 15 in this
chapter.
CAUTION: Whenever you handle the monitor, take care not to touch the surface of the LCD panel.
Pressure on the panel may cause non-uniformity of color or disorientation of the liquid crystals. If this
occurs the screen will not recover to its normal condition.
To assemble the ZR2040w, slide the pedestal upright into its base, as shown below.
Figure 3-1 Assembling the ZR2040w pedestal
6 Chapter 3 Setting Up the Monitor ENWW

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP ZR2240w and is the answer not in the manual?

HP ZR2240w Specifications

General IconGeneral
3DNo
Pixel pitch0.248 x 0.248 mm
Aspect ratio16:9
Response time8 ms
Display diagonal21.5 \
Display technologyLED
Contrast ratio (dynamic)2000000:1
Contrast ratio (typical)1000:1
Display number of colors-
Digital vertical frequency50 - 76 Hz
Digital horizontal frequency24 - 94 kHz
Display brightness (typical)250 cd/m²
Supported graphics resolutions720 x 400, 1600 x 900, 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1440 x 900 (WXGA+), 1680 x 1050 (WSXGA+), 1920 x 1080 (HD 1080), 640 x 480 (VGA), 800 x 600 (SVGA)
On/off switchYes
USB hub version2.0
DVI-I ports quantity0
USB Type-A downstream ports quantity4
LED indicatorsPower
Tilt angle range-5 - 35 °
Panel mounting interfaceNo mm
AC input frequency50 - 60 Hz
Power consumption (max)52 W
Power consumption (standby)0.3 W
Power consumption (typical)35 W
CertificationCSA-NRTL, CSA, FCC. CE, TUV, GOST, NOM, IRAM mark, PSB, VCCI, KC/KCC, Korea E-Standby, ISC, BSMI, \\r C-Tick, CCC, CECP, CEL
Product colorBlack
Country of originChina
Storage temperature (T-T)-20 - 60 °C
Operating temperature (T-T)5 - 35 °C
Operating relative humidity (H-H)20 - 80 %
Sustainability certificatesEPEAT Gold, ENERGY STAR
Weight and Dimensions IconWeight and Dimensions
Depth (with stand)234 mm
Height (with stand)367 mm
Weight (with stand)5740 g
Depth (without stand)59 mm
Width (without stand)508 mm
Height (without stand)303 mm
Weight (without stand)- g

Related product manuals