HPE OfficeConnect 1850 Series

Port Configuration 25
4 Switching Features
You can use the Switching pages to configure port operation and capabilities.
Port Configuration
You can use the Port Configuration pages to display port status, configure port settings, and view sta-
tistics on packets transmitted on the port.
Port Status
The Port Status page displays the operational and administrative status of each port and enables port
configuration. To view this page, click Switching > Port Configuration in the navigation pane.
Figure 10. Port Status Page
Table 7. Port Status Fields
Field Description
Interface The port or trunk ID.
Admin Mode The administrative mode of the interface. If a port or trunk is administratively disabled, it
cannot forward traffic.
 Enabled: Administratively enabled.
 Disabled: Administratively disabled.
 D-Disabled: Automatically disabled by the system due to error conditions. For example,
an interface may be disabled if it exceeded its rate limit. Please see error logs for more
information.