HPE OfficeConnect 1850 Series

Page 60 LLDP Global Statistics
Table 30. LLDP Remote Device Summary Fields
LLDP Global Statistics
The Link Layer Discovery Protocol (LLDP) Statistics page displays summary and per-port information
for LLDP and LLDP-MED frames transmitted and received on the switch.
To display the LLDP Global Statistics page, click LLDP > Statistics in the navigation pane.
Figure 38. LLDP Statistics Page
Field Description
Interface The HPE OfficeConnect 1850 interface that received the LLDP data from the remote system.
Remote ID The identifier assigned to the remote system that sent the LLDPDU.
Chassis ID The hardware platform ID for the remote system.
Port ID The physical address of the port on the remote device that sent the LLDP data.
Port Description The port description configured on the remote device. If the port description is not configured,
the field may show the interface number of the remote port, or it may be blank.
System Name The system description configured on the remote device. If the system description is not
configured, the field is blank.
Capabilities Supported The capabilities on the remote device. The possible capabilities include other, repeater,
bridge, WLAN AP, router, telephone, DOCSIS cable device, and station.
Capabilities Enabled The capabilities on the remote device that are enabled.
System IP The reported management IP addresses of the remote device. The system IP address
provides a link to the web interface on the remote device.