Port Mirroring 29
Figure 13. Port Mirroring Page
Table 10. Port Mirroring Fields
Click Apply to update the switch configuration. Your changes take effect immediately but are not
retained across a switch reset unless you click Save Configuration.
The Port Mirroring page also displays summary information for all source ports configured for mirror-
ing. To add one or more source ports to mirror to the destination port, click Add Source.
Figure 14. Add Port Mirroring Source
Field Description
Port Mirroring Enables or disables port mirroring globally on the switch. This feature is disabled by default.
Destination Port Select the switch port to which packets will be mirrored. Typically, a network protocol analyzer
is connected to this port.
To Next Page
Loading...
