6
881629-001
1. Introduction
Thank you for selecting a Hewlett Packard Enterprise product to protect your electrical equipment.
The UPS (uninterruptible power system) range has been designed with the utmost care. Hewlett Packard
Enterprise recommends that you take the time to read this manual to take full advantage of the many
features of your UPS.
Before installing your UPS, read the booklet presenting the safety instructions. Then follow the instructions
in this manual.
To discover the entire range of products and options available, contact your Hewlett Packard Enterprise
representative or visit our web site at www.hpe.com/info/rackandpower.
1.1 Environmental protection
Hewlett Packard Enterprise has implemented an environmental-protection policy. Products are developed
according to an eco-design approach.
Substances
This product does not contain CFCs, HCFCs, or asbestos.
Packing
To improve waste treatment and facilitate recycling, separate the various packing components.
• The cardboard used is comprised of over 50% of recycled cardboard.
• Sacks and bags are made of polyethylene.
• Packing materials are recyclable and bear the appropriate identifi cation symbol
01
PET
.
Materials Abbreviations Number in the symbols
Polyethylene terephthalat PET 01
High-density polyethylene HDPE 02
Polyvinyl chloride PVC 03
Low-density polyethylene LDPE 04
Polypropylene PP 05
Polystyrene PS 06
Follow all local regulations for the disposal of packing materials.
End of life
Hewlett Packard Enterprise will process products at the end of their service life in compliance with local
regulations. Hewlett Packard Enterprise works with companies in charge of collecting and eliminating our
products at the end of their service life.
Product
The product is made up of recyclable materials.
Dismantling and destruction must take place in compliance with all local regulations concerning waste.
At the end of its service life, the product must be transported to a processing center for electrical and
electronic waste.
Battery
The product contains lead-acid batteries that must be processed according to applicable local regulations
concerning batteries.
The battery can be removed to comply with regulations and in view of correct disposal.
To Next Page
Loading...
