TP80K User Manual
Disable “Cut paper when power on”:
The printer does not cut paper automatically after it is powered on.
Buzzer
Buzzer Volume: Very Low/Low/Standard/loud
Tick “Beeping after cutting” (The beeping time, times and interval time can be set for what
you want, such as 1 milliseconds, 2 milliseconds or 3 milliseconds, etc.):
The following setting is set as an example:
When cutting one piece of paper each time, the printer will emit the “Beep” for one time,
and the beeping time is two milliseconds and beeping interval is three milliseconds.
To Next Page
Loading...
Need help?
General
