19.CE Marking
SD4030B3 had performed tests for a driver and a motor individually that based on the following standards,
and had made the self-declaration of CE marking.
As for the EMC directive conformity, hence a condition varies depending on a customer's equipment
configuration with this driver and motor installed, so the customer should confirm the conformity of whole
devices by your own responsibility.
20.Caution for ESD damage
ElectroStatic Discharge may cause malfunction of, or damage on the driver.
When the driver power is on, do not touch directly potentiometers and switches with bare hands.
When changing the setting on the potentiometers and switches, use an insulated screwdriver.
To Next Page
Loading...
Need help?
General