HTC 650 HDX
Usage
1.0 19
Figure 4-5 Weights folded back
4.4. Access to grinding tools
Warning!
The tool becomes very hot during use. Tip the machine back and
allow it to stand for a short while. Use protective gloves when
removing the tools.
Warning!
Disconnect the electrical supply when changing tools or repairing
the machine.
1. Set the handle to the rear position - see Figure
4-2 on page 17
2. Fold the weights back and place a foot against one of the
weights, see Figure 4-6 on page 20.
To Next Page
Loading...
