HTC Touch Pro User Manual

32 Getting Started
1.3 Charging the Battery
New batteries are shipped partially charged. Before you start using your device, it is
recommended that you install and charge the battery. Some batteries perform best
after several full charge/discharge cycles.
To charge the battery
Connect the USB connector of the AC adapter to the sync connector on your
device.
Plug in the AC adapter to an electrical outlet to start charging the battery.
Note Only the AC adapter and USB sync cable provided with your device must be used to
charge the device.
Charging is indicated by a “breathing” white light around the Navigation Control. As
the battery is being charged while the power is on, a charging icon also appears
in the title bar of the Home screen. After the battery has been fully charged,
the Navigation Control LED shows a solid white light and a full battery icon
appears in the title bar of the Home screen.
For more information about the Navigation Control LED, see “LED Alerts” in this
chapter.
Warning! • Do not remove the battery from the device while you are charging it using
the AC or car adapter.
• As a safety precaution, the battery stops charging when it overheats.
1.
2.

HTC Touch Pro Specifications

General

Panel type	TFT
Display diagonal	2.8 \
Display resolution	640 x 480 pixels
Ringer type	Polyphonic
Processor frequency	0.528 GHz
Internal memory	512 MB
Sensor type	CMOS
Front camera type	Single camera
Multimedia Messaging Service (MMS)	Multimedia Messaging Service (MMS) is a standard way to send messages that include multimedia content to and from a mobile phone over a cellular network
Personal info management (PIM)	Alarm clock, Calculator, Calendar, Notes, To-do list
Form factor	Slider
Product color	Black
Talk time (2G)	7 h
Battery capacity	1340 mAh
Standby time (2G)	460 h
Keyboard layout	QWERTY
2G standards	EDGE, GPRS
Data network	wcdma
Bluetooth version	2.0+EDR

Weight and Dimensions

Depth	18.05 mm
Width	51 mm
Height	102 mm
Weight	165 g