HTC U19e - Unpairing from a Bluetooth Device; Receiving Files Using Bluetooth

Reconnecting a Bluetooth headset
Normally, you can easily reconnect your headset by switching on Bluetooth on HTC U19e, and then
turning on the headset.
However, you might have to connect manually if your headset has been used with another Bluetooth
device.
1. Turn Bluetooth on and check the list of paired devices.
See Turning Bluetooth on or off on page 115.
2. Tap the headset’s name in the Previously connected devices section.
3. If prompted to enter a passcode, try 0000 or 1234, or consult the headset documentation to
find the passcode.
If you still cannot reconnect to the headset, follow the instructions in Unpairing from a Bluetooth
device on page 116, and then follow the steps under Connecting a Bluetooth headset on page 115.
Unpairing from a Bluetooth device
1. Turn Bluetooth on and check the list of paired devices.
See Turning Bluetooth on or off on page 115.
2. In the Previously connected devices section, tap
next to the device to unpair.
3. Tap Unpair.
Receiving files using Bluetooth
HTC U19e lets you receive various files with Bluetooth including photos, contact info, and
documents such as PDFs.
Refer to the device’s documentation for instructions on sending information over Bluetooth.
1. Turn Bluetooth on.
See Turning Bluetooth on or off on page 115.
2. On the sending device, send one or more files to HTC U19e.
3. If asked, accept the pairing request on HTC U19e and on the sending device. You may also be
prompted to enter the same passcode or confirm the auto-generated passcode on both
devices.
You'll then get a Bluetooth authorization request.
4. Tap Pair.
5. When HTC U19e receives a file transfer request notification, slide the Notifications panel
down, tap the incoming file notification, and then tap Accept.
116 Wireless sharing