3. Plug in the power adapter to an electrical outlet to start charging the battery.
4. After you finish charging, unplug the USB cable from your phone first. Hold the part of the
power adapter that's close to the USB port when you unplug the adapter from the outlet.
§ Avoid charging the battery in hot environments. As a safety precaution, the battery may stop
charging to avoid overheating.
§ When you're using battery-intensive apps such as games or video streaming apps while charging
the battery, your phone may become warmer. This is normal.
§ It is strongly recommended to unplug the power adapter from the electrical outlet when not in
use.
Switching the power on or off
Switching the power on
Press the POWER button until HTC U19e vibrates.
When you turn on HTC U19e for the first time, you’ll need to set it up.
Switching the power off
1. If the display is off, press the POWER button to turn it back on.
2. Press and hold the POWER button for a few seconds.
3. Tap Power off on the options menu.
Setting up your phone for the first time
When you switch on your HTC phone for the first time—or after you've done a factory reset—you’ll
need to set it up.
If you have data from a previous phone that you need to copy over to HTC U19e, back up the
previous phone's data first. Or use the HTC Transfer Tool to transfer content from your previous
phone after you've finished setting up HTC U19e. For details, see Ways of getting content from
your previous phone on page 94.
1. If you need to navigate by voice feedback, turn on TalkBack by pressing and holding two
fingers on the first screen until you hear a message and then a beep.
Or if you accidentally enabled TalkBack, follow the onscreen tutorial to turn it off.
2. Choose the system language you want to use, read and agree to the terms of use, choose your
Internet connection, and sign in to your Google
®
Account.
17 Unboxing and setup
To Next Page
Loading...
