HTC U19e - Inserting the nano SIM and microSD Cards

Back panel
1. Dual cameras
2. Fingerprint scanner
3. LED flash
Inserting the nano SIM and microSD cards
§ Use a standard nano SIM card. A modified card that is thicker than the standard nano SIM card
will not fit properly on the tray and may damage the card slot.
§ The microSD
™
card is optional and sold separately.
1. Hold the phone face down.
2. Insert the tip of the tray eject tool that came with your phone—or a small bent paperclip—
into the tray eject hole.
When inserting the eject tool into the tray eject hole to remove the card tray, do not obstruct
the tray to avoid damaging the eject mechanism inside the slot.
3. Push the tip all the way into the hole until the tray ejects, and then pull the tray out.
14 Unboxing and setup